jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
Tekstowy podgląd strony 31 (kliknij aby zobaczyć)
AVR340
harman/kardon
<8>VIDEO PCB(40-1) REMOVAL 1. Remove the Top-cabinet, referring to the previous step<1>. 2. Disconnect the lead wire(BN41-6P) on the Tone PCB(37-3) from connector(CN41) on the Video PCB(40-1 3.Disconnect the connector (CN15-Card cable) on the Input PCB(39-1) from connector(CN43) on the Video PCB(40-1). 4. Remove 6 screws(S8) and then remove the Video PCB(40-1). <9>I-POD PCB(41) REMOVAL 1. Remove the Top-cabinet, referring to the previous step<1>. 2. Disconnect the lead wire(BN42-5P) on the INPUT PCB(39-1) from connector(CN42) on the I-POD PCB(41). 3. Disconnect the lead wire(BN45-4P) on the INPUT PCB(39-1) from connector(CN45) on the I-POD PCB(41). 4. Disconnect the lead wire(BN44-4P) on the Download PCB(37-9) from connector(CN42) on the I-POD PCB(41). 5. Remove 2 screws(S13) and then remove the I-POD PCB(41). <10>INPUT PCB(39-1) REMOVAL 1. Remove the Top-cabinet, referring to the previous step<1>. 2. Remove the Connect PCB(37-7). 3. Disconnect the lead wire(BN18-5P) on the Digital input PCB(37-8) from connector(CN18) on the Input PCB(39-1). 4. Disconnect the connect (BN72-Card canle)) on the Fip PCB(37-1) from connector(CN72) on the Input PCB(39-1) 5. Remove 11 screws(S8,S11) and then remove the Input PCB(39-1). <11>Download PCB(37-9) REMOVAL 1.Remove the Top-cabinet, referring to the previous step<1>. 2.Disconnect the connector(CN15) from lead wire(BN15-8P) on the Fip PCB(37-2) 3.Remove 2 screws(S4) and then remove the Download PCB(37-9). <12>POWER TRANS(36) REMOVAL 1. Remove the Top-cabinet, referring to the previous step<1>. 2. Disconnect the connector (BN20,BN96) on the Trans PCB(40-4) from lead wire(CN20-3P,CN96-6P) on the Main PCB(38-1). 3. Remove 4 Trans screws(S9) and then remove the Power Trans(36). <13>MAIN PCB ASS�Y(38-1) REMOVAL 1. Remove the Top-cabinet, referring to the previous step<1>. 2. Remove the Tuner module, referring to the previous step<7>. 3. Remove the Video PCB, referring to the previous step<8>. 4. Remove the Input PCB, referring to the previous step<9>. 5. Disconnect the connector(CN80) from lead wire(BN80-11P) on the Fip PCB(37-1). 6. Disconnect the connector(CN91) from lead wire(BN91-3P) on the Moms PCB(37-5). 7. Disconnect the connector (CN20,BN96) from lead wire(CN20-3P,BN96-8P) on the Trans PCB(40-4,40-5) 8. Remove 11screws(S1-1EA, S4-2EA, S6-2EA, S8-6EA) and then remove the Main PCB ASS�Y(38-1).
